R.R.O. 1990, REGULATION 358

SEWAGE SYSTEMS

Last amendment: O. Reg. 244/09.
This Regulation is made in English only.

DEFINITIONS

1. In this Regulation, “absorption trench” means an excavation in the soil being part of a leaching bed in which a distribution pipe will be or is laid and which allows leaching; “chamber” means a structure that,

(a) is covered by soil or fill,
(b) is constructed with an open bottom, and
(c) contains a pressurized pipe;

“distribution box” means a device for ensuring that effluent from a septic tank or sewage treatment plant is distributed in equal amounts to each line of distribution pipe in a leaching bed;

“distribution pipe” means a line or lines of perforated or open jointed pipe or tile installed in a leaching bed for the purpose of distributing effluent from a septic tank or proprietary aerobic sewage treatment plant to the soil in the leaching bed;

“earth pit privy” means a latrine consisting of an excavation in the ground surmounted by a superstructure;

“fill” means unconsolidated material brought from another location;

“ground water” means water below the surface of the ground occupying a zone of the earth’s mantle that is saturated with water;

“ground water table” means the elevation of the upper surface of the ground water existing in the area of the sewage system;

“hauled sewage” means sewage that,

(a) is not finally disposed of at the site where it is produced and is not carried away by a sewer approved under the Ontario Water Resources Act, and
(b) is stored or retained at the site where it is produced for periodic collection, handling, treatment, transportation, storage or processing prior to final disposal at a place other than where it was produced, and includes sewage that is removed from a sewage system for purposes of cleaning or maintaining the system but does not include the sewage in a sewer collection system that transfers the sewage from the site where it is produced to a Class 4, 5 or 6 sewage system located on a separate property;

“hauled sewage system” means works, installations, equipment, operations and land used in connection with the collection, handling, treatment, transportation, storage, processing and disposal of hauled sewage but does not include,

(a) equipment used for the storage or retention of sewage at the site where it is produced, or
(b) a sewage works approved under section 53 of the Ontario Water Resources Act or a predecessor thereof or a waste disposal site for which a certificate of approval has been issued under Part V of the Act;

“header line” means a line of pipe with watertight joints installed in a sewage system for the purpose of
distributing effluent from a septic tank or proprietary aerobic sewage treatment plant to the distribution pipe in a leaching bed;

“high ground water table” means the highest elevation at which there is physical evidence that the soil has been saturated with water;

“irrigation” means the disposal of hauled sewage by depositing it in a shallow trench, furrow or other shallow excavation in the ground and subsequently covering it with earth;

“leaching” means dispersal of liquid by downward or lateral drainage or both into permeable soil;

“leaching bed” means the soil absorption system constructed as absorption trenches or as a filter bed, located wholly in ground or raised or partly raised above ground as required by local conditions, to which effluent from a septic tank or proprietary aerobic sewage treatment plant is applied for treatment and disposal and that is composed of,

(a) the soil that is contained between the surface to which the sewage is applied and the bottom of the leaching bed,
(b) the distribution pipe and the stone or gravel layer in which such pipe is located, and
(c) the backfill above the distribution pipe, including the topsoil and sodding or other anti-erosion measure, and the side slopes of any portion elevated above the natural ground elevation;

“pail privy” means a latrine in which the receptacle for human waste consists of a removable container surmounted by a superstructure;

“percolation time” means the average time in minutes that is required for water to drop one centimetre during a soil percolation test as determined by the test or by other means;

“portable privy” means a portable latrine in which the receptacle for human body waste and the superstructure are combined structurally into one unit;

“pressurized pipe” means a line of perforated pipe that is intended to distribute effluent under pressure to soil or fill;

“proprietary aerobic sewage treatment plant” means a unit that is available commercially and that consists of one or more watertight vaults or compartments in which sewage is collected for the purpose of removing scum, grease and solids from the liquid and in which sewage is brought into contact with air to cause oxidation of the sewage and that discharges effluent for further treatment or for disposal into the soil;

“septic tank” means a watertight vault in which sewage is collected for the purpose of removing scum, grease and solids from the liquid without the addition of air and anaerobic digestion of the sewage takes place and that discharges effluent for further treatment or for disposal into the soil;

“sewage” means,

(a) waste of domestic origin which is human body waste, toilet or other bathroom waste, waste from other showers and tubs, liquid or water borne culinary and sink waste or laundry waste, and
(b) such other waste,

(i) as is suitable for treatment in a sewage system regulated under Part VIII of the Act, or
(ii) with respect to which a certificate of approval has been issued under section 77 of the Act;

“shallow buried trench” means an excavation in soil or fill that contains a chamber;

“Standard CAN3-B66” means the standards for prefabricated septic tanks and sewage holding tanks published in August, 1979 as CAN3-B66-M79 by the Canadian Standards Association;

“surface water” means water on the surface of the ground;

“tertiary sewage treatment unit” means a sewage treatment unit that has been designed by its manufacturer to produce effluent that contains 10 milligrams per litre or less of total suspended solids and biological oxygen demand;

“trade size” means any size designation traditionally used by the trade but restricted to products or classes of products manufactured to a standard or specification so that the designated trade size may be referred to an industry accepted table or chart which then provides the true dimensions of the product in question;

“vehicle” includes a plane, train, ship and boat or other vessel; and

“working capacity” means the volume of liquid that a septic tank or holding tank is capable of holding without overflowing while it is in its working position but does not include the volume of liquid contained in a compartment in which a pump or siphon is installed. R.R.O. 1990, Reg. 358, s. 1; O. Reg. 370/97, s. 1.

 

CLASSIFICATION OF SEWAGE SYSTEMS

2. (1) The following are classified as sewage systems for purposes of Part VIII of the Act:

1. Class 1 — a chemical toilet, an incinerating toilet, a recirculating toilet, a self-contained portable toilet and all forms of privy including a portable privy, an earth pit privy, a pail privy, a privy vault and a composting toilet system.

2. Class 2 — a leaching pit for greywater.

3. Class 3 — a cesspool for composting toilet overflow.

4. Class 4 — a septic tank system.

5. Class 5 — a sewage system which requires or uses a holding tank for the storage or retention of hauled sewage at the site where it is produced prior to its collection by a Class 7 sewage system.

6. Class 6 — a sewage system in which sewage is treated in a proprietary aerobic sewage treatment plant.

7. Class 7 — a hauled sewage system.

8. Class 8 — a sewage system in or on any vehicle except when it is used as part of a hauled sewage system.

9. Class 9 — a sewage works located in whole or in part in or on land on the title of which has been registered in the proper land registry office an instrument referred to in section 27 of the Ontario Water Resources Act granting, creating or containing a right or interest in, over, above, upon, across, along, through, under or affecting any land or any covenant or condition relating thereto affecting the construction, installation, establishment, enlargement, extension, alteration, operation, maintenance, cleaning, emptying or disinfection of the sewage system.

10. Class 10 — a sewage system located in the County of Essex, Kent or Lambton in which sewage is treated in a tertiary sewage treatment unit and then disposed of in a shallow buried trench.

R.R.O. 1990, Reg. 358, s. 2 (1); O. Reg. 370/97, s. 2 (1).

(2) A Class 4, 5, 6 or 10 sewage system that is designed to be capable of handling sewage flows in excess of 4,500 litres per day is also classified as a Class A sewage system. R.R.O. 1990, Reg. 358, s. 2 (2); O. Reg.
370/97, s. 2 (2).

 

EXEMPTIONS

3. (1) A Class 1 sewage system for which an application for a certificate of approval is not submitted is exempt from sections 76 and 78 of the Act.

(2) A person who has received a certificate of approval in respect of a Class 1, 2 or 3 sewage system and who constructs, installs or establishes the sewage system in accordance with the person’s application, except as it may be modified by the certificate of approval, and in accordance with the terms and conditions on the certificate of approval and otherwise complies with the Act and this Regulation is exempt from section 78 of the Act.

(3) A Class 8 sewage system is exempt from this Regulation except for subsection 4 (2) and from Part VIII of the Act except for section 83.

(4) A Class 9 sewage system is exempt from section 75 of the Act but only to the extent necessary for section 27 of the Ontario Water Resources Act to continue to operate with respect to the instruments referred to in paragraph 9 of subsection 2 (1). R.R.O. 1990, Reg. 358, s. 3.

 

STANDARDS COMMON TO SEWAGE SYSTEMS

4. (1) No person shall construct, operate or maintain a sewage system to which Part VIII of the Act and this Regulation apply except in accordance with the standards prescribed in this Regulation or as otherwise provided in a certificate of approval issued under section 77 of the Act, a term or condition made under subsection 77 (4) of the Act, a permit issued under section 78 of the Act or an order issued under section 79 of the Act.

(2) The following are prescribed as standards for the construction, operation and maintenance of all sewage systems:

1. Except for a Class 7 sewage system, the sewage system or any part thereof shall not emit, discharge or deposit sewage or effluent onto the surface of the ground.

2. Sewage or effluent shall not emit, discharge, seep, leak or otherwise escape from the sewage system or any part thereof into a piped water supply, well water supply, a watercourse, ground water or surface water.

3. Sewage or effluent shall not emit, discharge, seep, leak or otherwise escape from the sewage system or any part thereof other than from a place or part of the sewage system where the system is designed or intended to discharge sewage or effluent.

4. Insects and animal life shall be prevented from gaining access to sewage contained in the sewage system.

5. No sewage system or any part thereof shall emit, discharge, deposit or allow the emission, discharge or deposit of micro organisms of intestinal origin into the natural environment in such a manner as may be a hazard to health.

6. No gas shall emit, discharge or otherwise escape from the sewage system into any building or structure except in the manner in which the sewage system was designed or intended to emit or discharge gas.

7. No connections to the sewage system from non-sewage waste water sources shall be made.

8. The operator of the sewage system shall keep it maintained at all times so that its construction remains in accordance with the certificate of approval and any order made under the Act.

(3) Paragraph 2 of subsection (2) does not apply to prevent the operation of a sewage system designed and operated so that properly treated effluent is discharged into the soil.

(4) A sewage system that does not function in the manner in which it was designed to function and that is not being corrected under arrangements made by the owner is classified as a malfunctioning system.

(5) No person shall operate a malfunctioning system unless a full report of the problem has been made to the Director. R.R.O. 1990, Reg. 358, s. 4.

5. (1) No person shall construct a sewage system unless it is wholly contained within the parcel of land on which the structures, in connection with which the sewage system is to be used, are located.

(2) Subsection (1) does not apply to,

(a) a Class 7 sewage system;
(b) a sewage system owned and operated by the Crown, a municipality, or an organization acceptable to the Director, created for the purpose of operating a sewage system;
(c) a sewage system or that part of a sewage system located on a parcel of land that is subject to a registered easement or other registered interest in land permitting its maintenance, repair and replacement in favour of the parcel of land on which the structure being served by the sewage system is located; or
(d) a sewage system or that part of a sewage system located on land that is owned by Her Majesty the Queen in right of the Province of Ontario or is a public road allowance with the written approval of the authority having jurisdiction over such land or road allowance.

(3) No person shall construct a sewage system of a type set out in Column 1 of Table 1 so that any part thereof is closer to an item described in the heading of Column 2, 3, 4 or 5 of Table 1 than the horizontal distance set out in that column opposite the name of the sewage system. R.R.O. 1990, Reg. 358, s. 5.

 

CONSTRUCTION AND OPERATION STANDARDS

CLASS 1 SEWAGE SYSTEMS

7. (1) The following are prescribed as standards for the operation of a Class 1 sewage system:

1. Subject to paragraph 2, the sewage system shall receive or be used only for the disposal of human body waste.

2. If the sewage system has been specifically designed for the biological decomposition of non- waterborne biodegradable kitchen wastes or requires the addition of small quantities of plant matter to improve the decomposition of human body waste, it may receive such wastes in addition to human body waste.

(2) A standard prescribed for a privy is that it be enclosed with a superstructure that,

(a) shall be constructed of strong durable weatherproof materials;
(b) has a solid floor supported by a sill constructed of treated timber, masonry or other material of at least equal strength and durability;
(c) unless it is equipped solely as a urinal, is equipped with one or more seats each having a cover and being supported by an enclosed bench or riser which is lined with an impervious material on all interior vertical surfaces;
(d) is equipped with a self-closing door;
(e) has one or more openings for purposes of ventilation, all of which are screened;
(f) has a ventilation duct that is screened at the top end and that extends from the under side of the bench or riser to a point above the roof of the superstructure; and
(g) shall not have any openings for the reception of human body waste, other than urinals and those constructed in accordance with clause (c).

(3) The following are prescribed as standards for the construction of an earth pit privy:

1. The bottom of the pit shall be at least 0.5 metres above the high ground water table.
2. The sides of the pit shall be reinforced so as to prevent the collapse thereof.
3. The pit shall be surrounded on all sides and on its bottom by not less than 0.6 metres of earth.
4. The surface of the ground in the area surrounding the pit shall be so graded that surface drainage in the area of the pit will be diverted away from the pit.
5. The earth around the base of the sides of the superstructure of the earth pit privy shall be raised or mounded to a height of at least 0.15 metres above ground level.

(4) The following are prescribed as standards for the construction of a privy-vault or a pail privy:

1. The container or structure which is to be used for the holding or storage of sewage shall be watertight and made of a material which can be easily cleaned.
2. The earth around the base of the sides of the superstructure shall be raised or mounded to a height of at least 0.15 metres above ground level.
3. The surface of the ground in the area of the privy-vault or pail privy shall be so graded that surface drainage will be diverted away from the privy.

(5) The following are prescribed as standards for the construction of a portable privy:

1. It shall have a watertight receptacle which shall be suitable for the holding and storage of any sewage deposited therein.
2. The receptacle for the holding and storage of sewage shall be designed and constructed in such a manner as to allow it to be easily cleaned and emptied.
3. It shall be constructed of such material and in such a manner that it can withstand the stresses to which it will be subjected during its transportation to and from sites where it is to be used and during loading and unloading from vehicles used for the transportation of the portable privy to and from sites where it is to be used. R.R.O. 1990, Reg. 358, s. 7.

 

CLASS 2 SEWAGE SYSTEMS — LEACHING PITS

8. (1) A prescribed standard for the operation of a Class 2 sewage system is that it shall be used only for the disposal of sewage other than human body waste.

(2) The following are prescribed as standards for the construction of a Class 2 sewage system:

1. The bottom of the pit shall be at least 0.5 metres above the high ground water table.
2. The pit shall be constructed in such a manner as to prevent the collapse of its sidewalls.
3. Any material used to support or form the sidewalls of the pit shall be an open jointed material of a type that will permit leaching from the pit.
4. The pit shall be provided with a tight, strong cover that shall remain over the pit except when it is necessary to remove it for purposes of adding sewage to or removing sewage from the pit or for purposes of maintenance of the pit.
5. The earth around the perimeter of the pit shall be raised or mounded to a height of at least 0.15 metres above ground level.
6. The surface of the ground in the area of the pit shall be so graded that surface drainage in the area will be diverted away from the pit.
7. The pit shall be surrounded on all sides and on its bottom by at least 0.6 metres of earth. R.R.O. 1990, Reg. 358, s. 8.

 

CLASS 3 SEWAGE SYSTEMS — CESSPOOLS

9. (1) A prescribed standard for the operation of a Class 3 sewage system is that it shall be used only for the disposal of the contents of a Class 1 sewage system or effluent that has passed through a leaching bed that was in use before the 16th day of April, 1974.

(2) The following are prescribed as standards for the construction of a Class 3 sewage system:

1. The bottom of the cesspool shall be at least 0.5 metres above the high ground water table.
2. The cesspool shall be constructed in such a manner as to prevent the collapse of its sidewalls.
3. Any material used to support or form the sidewalls of the cesspool shall be an open jointed material of a type that will permit leaching from the cesspool.
4. The cesspool shall be provided with a tight, strong cover that shall remain over the cesspool except when it is necessary to remove it for purposes of adding sewage to or removing sewage from the cesspool or for purposes of maintenance of the cesspool.
5. The earth around the perimeter of the cesspool shall be raised or mounded to a height of at least 0.15 metres above ground level.
6. The surface of the ground in the area of the cesspool shall be so graded that surface drainage in the area will be diverted away from the cesspool.
7. The cesspool shall be surrounded on all sides and on the bottom by at least 0.6 metres of earth. R.R.O. 1990, Reg. 358, s. 9.